CREALITY 3D K1C

Creality K1C 3D printer

Suitable for 3D printing with carbon fiber reinforced filament

Continuing the success of the acclaimed Creality K1, the K1C takes over the closed enclosure and light and agile CoreXY system of the K1, being capable of speeds up to 600 mm/s. Designed to compete with the best 3D printers in the industry, the K1C sets a new standard with its all-metal hotend, improved motor system and innovative print bed.

K1C capabilities go beyond PLA; it is specifically optimized for the use of carbon fiber reinforced filament (the letter C in K1C indicates this very aspect). In addition, the K1C hotend can reach and maintain temperatures up to 300 degrees Celsius, and its direct drive system is designed to process carbon fiber reinforced filament with exceptional efficiency.

Main features
Print volume 220 x 220 x 250 mm

All-metal, non-locking, easy-to-change extruder kit

Maximum print speed 600 mm/s

Max Acceleration: 20000 mm/s²

Accepts carbon fiber reinforced filaments

The monitoring camera with artificial intelligence

Three fans for cooling and increased print quality

Smart and worry-free operation: ready to print out of the box

One-touch automatic calibration

A new extruder kit, all metal

The extruder is significantly improved to grip the filament firmly. At the same time, the steel and copper tip nozzle is integrated with a titanium alloy thermal barrier to block the phenomenon of filament temperature rise outside the melting zone and enable quick replacement.

Put carbon fiber reinforced filaments to work

Enjoy carbon fiber reinforced filaments, widely used in industrial printing due to their mechanical strength and resistance to wear, deformation and aging. With a hotend that allows up to 300°C and a hardened steel tip nozzle, the K1C can use carbon fiber reinforced filaments to print 3D models with excellent mechanical strength and high resistance to wear and deformation.

A trio of fans: cooling and increased print quality

Virtually the heat does not propagate from the hotend to the extruder, thus avoiding premature melting of the filament that could affect the feed flow.

A strong air current strengthens the fresh extrusion through a special air duct. Catalyzes layer bonding and refines layer texture.

An additional fan is positioned on one side of the print enclosure to help cool the model. Reduces stringing and warping of bridges and protrusions.

No vibration at high speeds

K1C can print at a speed of up to 600 mm/s, while still avoiding vibrations. The metal chassis is extremely solid as it integrates cast parts with fewer joints and joints. The printhead fans are dynamically balanced for vibration-free rotation during hotend cooling and 3D printing. In addition, the G-sensor in the printhead cancels resonance with input shaping. Therefore, your prints will not be affected by phenomena such as ringing or ghosting.

Silent mode and air purifier

Whenever you want peace, switch to silent mode, where the noise is less than 45dB, as "noisy" as flipping a book. Meanwhile, the built-in activated carbon filter retains some of the particles and compounds released when the filament melts. We recommend using it in a ventilated room.

Artificial Intelligence Assisted Experience

K1C is pre-assembled for plug-in and use. With just one touch, auto-calibration levels the print bed and gets everything ready for you. Say goodbye to frustrating paper tests. The included AI camera can monitor the print for you and alert you in case of an error. It's also great for monitoring and timelapse shooting. Moreover, when you print a batch of designs and only one of them fails, you can easily omit it from the batch.

Creality Print & Creality Cloud

Creality Print slicing software offers intelligent cooling, optimal retraction, thin tree supports, and secure management of print farms. Creality Cloud offers tons of free 3D models and the freedom to print in the cloud.