CREATBOT DX PLUS 3D printer

CREATBOT DX PLUS 3D printer with solid construction, dual print head and semi-enclosed print enclosure with transparent walls, heated ceramic print table and Bowden type extruders.

Full metal chassis

A 3D printer requires a certain weight to ensure stability during operation. That's why an all-metal chassis is the best strength structure for a 3D printer.

Automatic shutdown

The printer is equipped with a power management module. When printing is completed and no action is taken for 5 minutes, the power supply will be cut off. It is very useful for increasing energy efficiency.

Gear motors for extruder

A gear motor produces more torque compared to a regular stepper motor, allowing for smooth filament feeding and precise, firm retraction.

Heated ceramic printing table

Above the heating panel is a special ceramic plate that provides better heat distribution, is very smooth and ensures very good adhesion. Metal support for the printing table. The use of a full metal support for the printing table ensures a very stable printing platform.

High print volume

The printer stands out with an impressive print volume of 300x250x520 mm, more than enough for most users.

Filament Detection System

If the filament runs out while printing, the printer will automatically stop and allow the filament to be changed, then continue printing.

High printing temperature

The print nozzles can operate up to temperatures of 260 ºC hotend and 100 ºC at the print table, which allows the use of a wide range of filaments.

Continuous printing

If the power supply is interrupted, the printer will memorize the last position, lower the print table and retract its filament. When the power is restored, printing can continue.

Print space closed

The print space is closed on all sides, which prevents warping or peeling of layers, especially for large objects.