Description

The H2C 3D printer is designed for production, not just prototyping. It combines a high-performance servomotor extruder, ultra-precise movement of 50 µm, heated active camera and an advanced vision system with sensors and cameras for real-time monitoring. The platform is designed for technical materials, work at high speeds with low risk of errors and safe integration in professional or industrial environments, including those with high security requirements.

Bambu Lab H2C essential features

Superior print performance
Better reliability at high speeds and real-time error detection.

The PMSM servo motor extruder delivers up to 10 kg of maximum extrusion force, about 70% more than a stepper motor, significantly improving extrusion stability at high flow rates. Our proprietary servo architecture samples resistance and position at 20kHz and actively detects filament grinding and jams in real time.

50 µm ultra-fine motion accuracy*
With Vision Encoder, H2C achieves distance-independent motion accuracy of less than 50 µm, thinner than wire human hair. The system automatically compensates for any mechanical drift during calibration and ensures constant precision and top performance over time.

Smooth surface, sharp edges
H2C uses both the servo motor on the extruder and high-resolution eddy current sensors on the nozzle to sense extrusion dynamics. This allows precise extrusion control and automatic calibration of Pressure Advance parameters for each filament, resulting in smoother surfaces and sharper, cleaner edges.

Use the full potential of high-performance materials
The active H2C heated chamber at 65 °C and 350 °C nozzles minimize deformation and curvature and, at the same time time, improve the adhesion between layers for high-performance filaments and high-temperature materials.

Chamber heater
Nozzles 350 °C

H2C is equipped with a set of 59 sensors and a four-camera vision system, coordinated by our proprietary neural algorithm. During printing, this system offers intelligent real-time diagnostics and can detect even the most subtle print anomalies as they occur. There is no need for the user to be an expert in troubleshooting, the printer automatically manages the identification of problems.

AI Camera
H2C is equipped with an AI assisted camera system. This intelligent monitoring system continuously tracks extrusion patterns and immediately detects material build-up, filament deviations and extrusion failures. It also runs a preliminary check before starting printing to ensure a safe start.

Class-leading air filtration
H2C's three-stage filtration system is essential for technical filament printing. The powerful combination of the G3 prefilter, the HEPA H12 filter and the coconut shell activated carbon filter effectively reduces odors and potentially harmful particles frequently released by technical materials.

Fireproof construction
The H2C room is built entirely of fireproof material and offers robust passive fire protection throughout the premises.

H2C provides convenient cloud connectivity for remote control from any device. For security-sensitive applications, it also ensures completely offline functionality with total physical isolation. Users can operate the printer, send files and update firmware without an internet connection. For advanced users, the Developer mode allows access to the MQTT port for integration with third-party components and software.

TECHNICAL SPECIFICATIONS Bambu Lab H2C

Item	Technical specification
Print technology	Fused Deposition Modeling type FDM with filament fused deposition
Work volume a left nozzle	325 x 320 x 325 mm³ (printing with a single left nozzle)
Work volume a right nozzle	305 x 320 x 325 mm³ (printing with a single right nozzle)
Work volume two nozzles	300 x 320 x 325 mm³ (printing with two nozzles)
Total volume for two nozzles	330 x 320 x 325 mm³
Chassis	Aluminum and steel
Outer frame	Plastic and glass
Printer physical dimensions	492 x 514 x 626 mm
Net weight	32.5 kg
Extruder gears	Tempered steel
Nozzle	Tempered steel
Maximum nozzle temperature	350 °C
Supported nozzle diameters	0.2mm, 0.4mm, 0.6mm, 0.8mm
Cutter filament	Integrated filament cutter
Filament diameter	1.75 mm
Extruder motor	Bambu Lab high precision permanent magnet synchronous motor
Building plate material	Flexible steel plate
Type of board included	Textured PEI board
Supported card types	Textured PEI board and board for technical materials
Heated bed maximum temperature	120 °C
Workhead maximum speed	1000 mm per second
Workhead maximum acceleration	20,000 mm per second squared
Maximum hotend throughput	40 mm³ per second.Test parameters: round model 250 mm with a single outer wall, Bambu Lab ABS, 280 °C
Room temperature control	Active room heating supported
Maximum room temperature	65 °C
Air prefilter	G3 Grade Prefilter
HEPA filter	HEPA filter grade H12
Active carbon filter	Filter with granular active carbon from coconut shell
Filtering VOC compounds	Higher VOC compound filtration level
Filtering suspended particles	Filtering suspended particles supported
Part cooling fan	Part cooling fan with closed loop control
Hotend cooling fan	Hotend cooling fan with closed loop control
Electronic board fan	Main electronic board fan with closed loop control
Room exhaust fan	Room exhaust fan with closed loop control
Room circulation fan	Air circulation fan in the room with closed loop control
Auxiliary cooling fan	Auxiliary part cooling fan with closed loop control
Intensive head cooling fan	Working head intensive cooling fan with closed loop control
Supported threads	PLA, PETG, TPU, PVA, BVOH, ABS, ASA, PC, PA, PET, PPS and filaments reinforced with carbon fiber or glass PLA, PETG, PA, PET, PC, ABS, ASA, PPA, PPS
Camera Live View	Built-in camera for live view 1920 x 1080
Nozzle chamber	Integrated camera for nozzle monitoring 1920 x 1080
BirdsEye Camera	Integrated BirdsEye 3264 x 2448 camera available on Laser Edition version
Working head room	Integrated camera on the working head 1600 x 1200
Door sensor	Door sensor supported
Filament missing sensor	Supported filament end sensor
Filament tangle sensor	Supported filament tangle sensor
Filament Odometry	Filament odometry supported with AMS
Recovery after power failure	Power failure resume function supported
Supply voltage	100–120 VAC or 200–240 VAC, 50–60 Hz
Max Power	1800 W at 220 V and 1250 W at 110 V
Typical Power	200 W at 220 V and 200 W at 110 V for printing with a single nozzle in PLA
Working temperature	Average working temperature range 10–30 °C
Touch Screen	5-inch touchscreen with 720 x 1280 resolution
Storage	8 GB EMMC integrated and USB port
Control interface	Touch screen control, mobile app, PC app
Motion controller	Motion controller with dual core Cortex M4 and single core Cortex M7
Application Processor	ARM quad core application processor with NPU neural processing unit
NPU Power	NPU with 2 TOPS processing power
Official Slicer	Bambu Studio
Third slices	Supports third-party slicers that exportStandard G code, such as Super Slicer, PrusaSlicer and Cura. Advanced functions may not be available
Supported operating systems	MacOS, Windows, Linux
Ethernet control	Ethernet control not available
Wireless Network	Wi Fi wireless connectivity
Network kill switch	Network kill switch not available
Removable Network Module	Removable network module not available
802.1X Network Access Control	802.1X Network Access Control is not available
Wi Fi operating frequency	2412–2472 MHz and 5150–5850 MHz for FCC and CE, 2400–2483.5 MHz and 5150–5850 MHz for SRRC
Wi Fi Transmission Power	2.4 GHz less than 23 dBm for FCC and less than 20 dBm for CE SRRC MIC. 5 GHz bands according to the FCC CE SRRC MIC specifications mentioned by the manufacturer
Wi Fi Protocol	IEEE 802.11 a b g n standard

Product details

Bambu Lab H2C 3D printer

Description

Bambu Lab H2C essential features

TECHNICAL SPECIFICATIONS Bambu Lab H2C

TECHNICAL SPECIFICATIONS Bambu Lab H2C

Recommended products

Original Prusa i3 MK2S 3D Printer Assembled

Original Prusa MK2.5S 3D Printer Assembled

Original Prusa i3 MK3S+ 3D Printer Assembled

Original Prusa MK3S+ MMU3 3D printer, Assembled

Customer reviews