Bambu Lab H2S 3D printer

1. Print volume and precision

• Build Volume 340×320×340 mm³
  Work volume 340×320×340 mm³, the largest print volume in the Bambu Lab range.
• ＜ 50 μm Motion Accuracy
  Motion accuracy below 50 μm thanks to the Vision Encoder system, with automatic correction of mechanical deviations over time.
• Auto Hole/Contour Compensation
  Automatic hole and contour compensation for tight tolerances, suitable for technical parts and precision assembly.

2. Temperature and supported materials

• 350 °C Hotend
  Hotend up to 350 °C for advanced technical filaments.
• 65 °C Active Heated Chamber
  Chamber actively heated to 65 °C to reduce deformations and improve adhesion between layers.
• Ready for Engineering Filaments
  Supports the full range of Bambu filaments, from PLA and PETG to PC, PPA and fiber materials.

3. Extrusion control and surface quality

• DynaSense Extruder with PMSM Servo
  Extruder with PMSM servo motor that offers up to 10 kg of extrusion force, 67% more than a classic stepper motor.
• 20,000 Times/Sec Extrusion Torque Regulation
  Extrusion torque regulation up to 20,000 samples per second for stable flow and filament or grinding detection clogging.
• Even Surfaces, Crisp Edges
  Precise nozzle pressure control, with eddy current sensors, for even surfaces and crisp edges.
• Active Vibration Compensation
  Active vibration compensation for high print quality at high speeds.

4. Speed and productivity

• Up to 1000 mm/s Toolhead Speed
  Speed of the working head up to 1000 mm per second.
• Up to 20,000 mm/s² Acceleration
  Acceleration up to 20,000 mm per square second for significantly reduced print times.
• Up to 30% Faster Print Speed vs X1C
  Print time reduced by up to 30 percent compared to the X1 Carbon model, with concrete examples of faster jobs.

5. Sensors, cameras and AI

• AI Detection
  Real-time AI detection for spaghetti defects, material agglomerations and blockage in the purge area.
• 23 Sensors & 3 Cameras
  23 sensors and 3 dedicated cameras for vision, power, thermal control and safety.
• Pre-Flight Checklist by AI
  Automatic check before print, with scanning of the work surface and audit of the hardware configuration.

6. Cutting and engraving functions

• 10W 455 nm Laser Cutting/Engraving
  10 W laser module at 455 nm for cutting and engraving materials such as plywood up to 5 mm, acrylic and PU.
• Live Spatial Alignment
  Live spatial alignment with BirdsEye overhead camera and overhead camera, track preview directly on material with accuracies of approximately 0.3mm.
• Digital Cutting
  Digital cutting for paper, vinyl, PU synthetic leather and other thin materials.
• Drawing Module
  Drawing module for automating outlines, sketches and written notes.

7. Air management and working modes

• Flap Switch Airflow & Filtration System
  Flap Switch Airflow & Filtration System.
• High-Temp Printing Mode
  High-Temp Printing Mode with internal air recirculation through filter and heater.
• Low-Temp Printing Mode
  Low temperature printing mode with cold air intake and filtered exhaust, optimal for PLA and PETG.
• Laser Cutting/Engraving Mode
  Dedicated laser mode with efficient smoke evacuation for safety and comfort.

8. Security

• Laser Safety Window
  Laser safety window, protects the eyes from the 455 nm beam.
• Five Flame Sensors
  Five flame sensors for early detection of thermal incidents.
• Flame-Retardant Chamber
  Chamber made of fire-resistant materials.
• Emergency Stop
  Emergency stop button for immediate interruption of operation.

9. Connectivity, security and integration

• Cloud Connectivity
  Cloud connectivity for remote control and monitoring from any device.
• Full Offline Operation
  Full offline operation possibility for security sensitive environments.
• Developer Mode with MQTT Access
  Developer Mode with MQTT access for easy integration with third-party applications and systems.

10. Ergonomics and construction

• Quick-Swap Nozzle
  Tool-free quick-swap nozzle for easy switching between nozzles and hoods.
• Quiet by Design ＜ 50 dB
  Silent operation with active engine noise cancellation and airflow optimization, below 50 dB.
• All-Metal, Die-Cast Body
  All-metal die-cast aluminum body, with high rigidity for high speed and large format printing.

11. Multicolor printing and filament management

• AMS 2 Pro Integration
  Compatible with AMS 2 Pro for multicolor printing and integrated filament drying.
• AMS HT Integration
  Compatible with AMS HT for high temperature technical materials.
• Electro-Magnetic Air Vent
  Electromagnetic ventilation flap for alternating between dehumidification and sealing.
• Auto-Rotate Drying
  Automatic rotation of filament rolls for uniform drying.
• RFID Sync
  RFID sync for automatic drying settings and parameters for official Bambu filaments.

12. Software and ecosystem

• MakerWorld
  Access to over a million print-ready models.
• MakerLab
  AI-assisted 3D modeling tools for model generation and adjustment.
• Maker's Supply
  Source of components and accessories to complete printed projects.
• Software Ecosystem
  Control and monitoring from any device through the Bambu software suite.
• Bambu Lab Academy & Wiki
  Educational resources and knowledge base for configuration, use and troubleshooting.

TECHNICAL SPECIFICATIONS Bambu Lab H2S: